Kia Carens: Charging System / Alternator Specifications

Kia Carens RP (2013-2018) Service Manual / Engine Electrical System / Charging System / Alternator Specifications

Specification
Alternator
Item
Specification
Rated voltage
13.5V, 110A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator built-in type
Regulator Setting Voltage
External mode
Refer to below graph
Internal mode
14.55 ± 0.3V
Temperature Gradient
External mode
0 ± 3 mV / °C
Internal mode
-3.5 ± 2mV / °C

※ Regulator Setting Voltage (External mode)
Alternator Description and operation
Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In additi ...

Alternator Components and components location
Components 1. OAD (Overrunning Alternator Decoupler) 2. Front Bracket 3. Front Bearing 4. Stator 5. Rotor 6. Rear Bearing 7. Rear Brack ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Closing the fuel filler lid


1. To install the cap, turn it clockwise until it “clicks”. This indicates that the cap is securely tightened. 2. To close the lid, press the edge of the lid. Make sure it is securely closed. ✽ NOTICE When refueling fully at an up hill, the fuel gauge may not point to the 1 (or F) position. ...

Kia Carens RP (2013-2018) Owners Manual: Checking the amount of air conditioner refrigerant and compressor lubricant


When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also has a bad influence on the air conditioning system. Therefore, if abnormal operation is found, we recommend that the system be inspected by an authorized Kia dealer. WARNING - Vehicles equip ...

Copyright © www.kicaman.com 2015-2024