Kia Carens: Safety features of your vehicle / Front seat adjustment - manual
Forward and backward
To move the seat forward or backward:
1. Pull the seat slide adjustment lever up and hold it.
2. Slide the seat to the position you desire.
3. Release the lever and make sure the seat is locked in place.
Adjust the seat before driving, and make sure the seat is locked securely by
trying to move forward and backward without using the lever. If the seat moves,
it is not locked properly.
Seatback angle
To recline the seatback:
1. Lean forward slightly and lift up the seatback recline lever.
2. Carefully lean back on the seat and adjust the seatback of the seat to the
position you desire.
3. Release the lever and make sure the seatback is locked in place. (The lever
MUST return to its original position for the seatback to lock.)
Seatback folding (for front passenger’s seat)
The front passenger’s seatbacks can be folded to facilitate carrying long items
or to increase the luggage capacity of the vehicle.
To fold the seatback :
1. Lower the front passenger’s seat headrests to the lowest position. And slide
the seat rearward.
2. Pull on the seatback folding lever (recline lever), then fold the seat toward
the front of the vehicle. When you return the seatback to its upright position,
always be sure it has locked into position by pushing on the top of the seatback.
3. To use the front passenger’s seat, lift and pull the seatback backward by
pulling on the folding lever.
Pull the seatback firmly until it clicks into place. Make sure the seatback is
locked in place.
WARNING
- Do not fold the front passenger’s seat, if the occupants in the 2nd row
center and front passenger’s side seats. It may cause the injury to occupants
by the seat device.
- Be careful not to pinch your hands or fingers on the seat device, when you
fold or unfold.
Seat cushion height
To change the height of the seat cushion, push the lever upwards or downwards.
- To lower the seat cushion, push down the lever several times.
- To raise the seat cushion, pull up the lever several times.
Front seat
(1) Forward and backward
(2) Seatback angle
(3) Seat cushion height (Driver’s seat)
(4) Lumbar support (Driver’s seat)*
(5) Seat cushion extension*
(6) Headrest
2nd row seat
(7) Forwar ...
The driver’s seat can be adjusted by using the control switches located on the
outside of the seat cushion. Before driving, adjust the seat to the proper position
so as to easily control the steer ...
Other information:
Wiper Setting Position Calibration Mode (Teach-In)
; If the assembled wiper arm is not lined up with the mark on the windshield,
activate the opposite electronic motor wiper arm and set the blade setting position
in teach-in mode to move the wiper arm to the correct position.
1 ...
Be sure to adjust mirror angles before driving.
Your vehicle is equipped with both left-hand and right-hand outside rearview
mirrors. The mirrors can be adjusted remotely with the remote switch. The mirror
heads can be folded back to prevent damage during an automatic car wash or when
passing in ...