Kia Carens: Light bulbs / License plate light bulb replacement

Kia Carens RP (2013-2018) Owners Manual / Maintenance / Light bulbs / License plate light bulb replacement

1. Remove the lens retaining screws with a philips head screwdriver.

2. Remove the socket from the assembly by turning the socket conterclockwise.

3. Remove the bulb by pulling it straight out.

4. Install the socket into the assembly by aligning the tabs on the socket with the slots on the assembly and turning the socket clockwise.

5. Install a new bulb.

6. Reinstall the lens securely with the lens retaining screws.

High mounted stop light bulb replacement

If the light does not operate, we recommend that the system be checked by an authorized Kia dealer. ...

Interior light bulb replacement

Map lamp, Vanity mirror lamp, Room lamp, Luggage room lamp and Foot lamp 1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing. 2. Remove the bulb by pulling it strai ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Engine Control Module (ECM) Repair procedures

Removal When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] 1) Perform "ECM Neutral mod ...

Kia Carens RP (2013-2018) Service Manual: Windshield Deicer Repair procedures

Inspection 1. Remove the cowl top cover. (Refer to Body - "Cowl Top Cover") 2. Disconnect the windshield deicer connector (A). 3. Check for continuity between the terminals of de ...