Kia Carens: Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Description and operation

Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM. By using this signal, the ECM calculates the intake air quantity and engine speed.

The MAPS consists of a piezo-electric element and a hybrid IC amplifying the element output signal. The element is silicon diaphragm type and adapts pressure sensitive variable resistor effect of semi-conductor. Because 100% vacuum and the manifold pressure apply to both sides of the sensor respectively, this sensor can output analog signal by using the silicon variation proportional to pressure change.

ETC (Electronic Throttle Control) System Repair procedures

Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the o ...

Manifold Absolute Pressure Sensor (MAPS) Specifications

Specification Pressure [kPa (kgf/cm², psi)] Output Voltage (V) 20.0 (0.20, 2.9) 0.79 46.7 (0.47, 6.77) ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Inside Rear View Mirror Repair procedures

Replacement [Manual Mirror]    • Put on gloves to protect your hands. 1. Loosen the inside rear view mirror mounting screw (C). ...

Kia Carens RP (2013-2018) Service Manual: Shift Lever Repair procedures

Removal 1. Remove the floor console assembly. (Refer to Body “Floor Console”) 2. Disconnect the control cable (A). 3. Disconnect the wire mounting clips (B). 4. ...