Kia Carens: Hydraulic System / Oil Pump Components and components location

Kia Carens RP (2013-2018) Service Manual / Automatic Transaxle System / Hydraulic System / Oil Pump Components and components location

Components

1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal

6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaft
9. Sleeve
10. Bolt

Oil Pump Operation Flow

1. Inhale(Oil filter)
2. Inhale(Valve body)
3. Outlet
4. 26/B operation pressure

5. 35R/C operation pressure
6. Lubrication
7. Lock up clutch apply pressure
8. Lock up clutch release pressure

Oil Pump Description and operation

Description The oil pump is built-in as a single unit with the 26 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various part ...

Fluid Components and components location

Components Location 1. ATF filler hole (eyebolt) 2. ATF level plug 3. ATF drain plug ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Trailer brakes

If your trailer is equipped with a braking system, make sure it conforms to your country’s regulations and that it is properly installed and operating correctly. If your trailer weight exceeds the maximum allowed weight without trailer brakes, then the trailer will also require its own brakes as ...

Kia Carens RP (2013-2018) Service Manual: Variable Intake Solenoid (VIS) Valve Description and operation

Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or closes this valve according to engine condition (Refer to below table). ...