Kia Carens: Floor Console / Rear Console Cover Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Floor Console / Rear Console Cover Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the floor console assembly. (Refer to Floor Console - "Floor Console Assembly")

2.	Loosen the rear console cover mounting screw (A).

3.	Using a screwdriver or remover, remove the rear console cover (A).

4.	Remove the interior antenna connector mounting clip (A).

5.	Remove the rear power outlet connector mounting clip (A).

6.	Disconnect the rear power outlet connector (B).

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Replace any damaged clips.

Rear Console Cover Components and components location

Component Location 1. Rear console cover ...

Console Armrest Components and components location

Component Location 1. Console armrest ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Fuel Pressure Control Valve Schematic diagrams

Circuit Diagram (M/T) (A/T) ...

Kia Carens RP (2013-2018) Service Manual: Repair procedures

Removal 1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery (A) and ECM (B). 3. Disconnect the brake fluid level switch connector (A), and remove the ...