Kia Carens: Wipers and washers / Windshield washers (front)
In the O (Off) position, pull the lever gently toward you to spray washer fluid
on the windshield and to run the wipers 1-3 cycles.
Use this function when the windshield is dirty.
The spray and wiper operation will continue until you release the lever.
If the washer does not work, check the washer fluid level. If the fluid level
is not sufficient, you will need to add appropriate non-abrasive windshield washer
fluid to the washer reservoir.
The reservoir filler neck is located in the front of the engine compartment on
the passenger side.
CAUTION
To prevent possible damage to the washer pump, do not operate the washer when
the fluid reservoir is empty.
WARNING
Do not use the washer in freezing temperatures without first warming the windshield
with the defrosters; the washer solution could freeze on the windshield and obscure
your vision.
CAUTION
- To prevent possible damage to the wipers or windshield, do not operate
the wipers when the windshield is dry.
- To prevent damage to the wiper blades, do not use gasoline, kerosene,
paint thinner, or other solvents on or near them.
- To prevent damage to the wiper arms and other components, do not attempt
to move the wipers manually.
- To prevent possible damage to the wipers and washer system, use anti-freezing
washer fluids in the winter season or cold weather.
When the wiper blade is not in a normal position, place the ignition switch in
the ON position. The wiper blade will return to the normal position.
Following are cases a wiper blade may be in an abn ...
If your vehicle is equipped with the headlight washer it will operate at the
same time when you operate the windshield washer. It will operate when the headlight
switch is in the first or second po ...
Other information:
Description
•
Component location :
•
Function
1)
Start is possible only when press down the clutch pedal.
2)
Ignition lock switch can be prevent to unintended depar ...
Description
•
SS-B solenoid valve is ON/OFF type.
•
When TCM supplies power to solenoid valve, speed range is changed by
operating the solenoid valve.
SS-B Solenoid Valve operation table
...