Kia Carens: Front Seat Belt / Front Seat Belt Buckle Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Buckle Repair procedures

Replacement

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	Disconnect the front seat belt buckle connector wiring (A).

After loosening the mounting bolt, then remove the front seat belt buckle (A).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

Install in the reverse order of removal.

•	Make sure the connector is plugged in properly.

•	Replace any damaged clips.

Front Seat Belt Buckle Components and components location

Component Location 1. Front seat belt buckle ...

Rear Seat Belt

...

Other information:

Kia Carens RP (2013-2018) Service Manual: Blower Resistor (Manual) Repair procedures

Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement ...

Kia Carens RP (2013-2018) Service Manual: A/C Pressure Transducer Description and operation

Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of t ...