Kia Carens: Engine Control System / Fuel Pressure Control Valve Repair procedures

Inspection

1.	Turn the ignition switch OFF and disconnect the battery negative (-) cable.

2.	Disconnect the fuel pressure regulator valve connector.

3.	Measure resistance between the fuel pressure regulator valve terminals 1 and 2.

Check that the resistance is within the specification.

Specification: Refer to “Specification”

Circuit Diagram (M/T) (A/T) ...

...

Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal ...

Replacement • Put on gloves to protect your hands. • When ...