Kia Carens: Display / Warning message
The message will appear when camera’s field of view is covered by some objects.
The system stops until the field of view is normal.
Check the windshield around the camera view area.
If the system does not work normally even though camera’s field of view is cleared,
we recommend that the system be checked by an authorized Kia dealer.
When SLIF is not working properly, the warning message will come on for a few
second. After the message disappears, the master warning light will illuminate.
We recommend that the system be checked by an authorized Kia dealer. The system
may not fully operate and provide correct information in the following situations.
- Traffic signs are positioned on sharp curve.
- Poorly positioned traffic sign. (eg. Rotated, shaded by any object, damaged…)
- Concealed traffic signs by other vehicle.
- Broken LED traffic signs.
- Poor weather like snow, rain, fog
- Reflected glare around and/or on the traffic sign.
- There is insufficient illumination of the traffic signs in the night.
- There is bright lights around traffic signs.
- There is dirt, ice or frost on the windshield in the area of the camera.
- When camera field of view is covered by objects such as a sticker, paper,
leaf fall.
- When driving very close to the vehicle in front of you.
- When navigation system has malfunction.
- When bus or trucks attached with a speed sticker are passing you.
- When you are at a certain location not covered by the navigation system.
- When the navigation system is not updated to the latest map version.
If the system doesn’t have a reliable speed limit information, the following
symbol is displayed in both the instrument cluster and navigation screen.
If the system detect no passing sign, ...
The driver must be cautious in the below situations for the system may not assist
the driver and may not work properly.
Do not stick or attach anything to the windshield in front of the camera
as ...
Other information:
Components
1. Clutch
switch
2. Ignition lock switch
3. Clutch pedal assembly
4. Master cylinder assembly
5. Connector
(Only diesel)
6. Regulator (Only diesel)
7. Clutch tube
...
Removal
•
In order to remove the front glass, use the tools shown in the
following figure:
[Tooling Diagram]
...